Marantz AV7701 ユーザーズマニュアル

93

If the HDMI control function does not operate properly, check the 
following points.
• Is the TV or player compatible with the HDMI control function?
• Is “HDMI Control” (

) set to “On”?

• Is “Power Off Control” (

• Is “Control Monitor” (

connected to television?

• Is “Control Monitor” (

HDMI control function when this unit is connected to two TVs that 
support HDMI connectors?

• Are the HDMI control function settings of all devices correct?

• When “HDMI Control” is set to “On”, it consumes more standby 

• The HDMI control function controls operations of a TV that is 

compatible with the HDMI control function. Make sure that the TV 
and HDMI are connected when you perform HDMI control.

• Some functions may not operate depending on the connected TV 

or player. Check the owner’s manual of each device for details 
beforehand.

• When “Power Off Control” on the menu is set to “Off” 

device is in the standby mode.

• When connection changes are implemented, such as adding 

connections to HDMI devices, linked operations may be initialized. 
In this case, you will need to reconfigure the settings.

• When “HDMI Control” is set to “On”, it is not possible to assign an 

HDMI connector to “TV AUDIO” at “Input Assign” (

• Should any of the operations below be performed, the interlocking 

function may be reset, in which case, repeat steps 2 and 3.
• “Input Assign” – “HDMI” (

) setting has changed.

• “Video Output” (

) setting is changed.

• There is a change to the connection between the devices and the 

HDMI, or an increase in devices.

• The HDMI ZONE2 function is not compatible with the HDMI control 

function.

• When the HDMI ZONE2 function is used with “HDMI Control” in the 

menu set to “On”, the HDMI ZONE2 function may not fully work.

• If “HDMI Control” in the menu is set to “On” and the power of 

ZONE2 is on, this units may behave as follows. It is recommended 
to disable the HDMI control function on your TV and player when 
using the HDMI ZONE2 function. (Some example behaviors are 
listed below.)
• When the power of the TV used for MAIN ZONE is off and the 

player selected for ZONE2 starts playback, the TV used for MAIN 
ZONE is turned on. In this case, the input source selected for MAIN 
ZONE changes to the input source selected for ZONE2.

• When playing back a TV used for MAIN ZONE and ZONE2 with 

an HDMI connection, turning off the TV used for MAIN ZONE also 
turns off this unit and the player.

• When a same input source is selected for MAIN ZONE and ZONE2, 

stopping playback of the player on the TV stops the playback on the 
player and the video being played back in ZONE2 as well.

DVD