Marantz SA-14S1 ユーザーズマニュアル

22

ENGLISH

• The dedicated driver must be installed in the computer 

before this unit is connected to a computer. Operation will 

not occur correctly if connected to the computer before 

the dedicated driver has been installed. Moreover, if the 

computer is running Windows XP as its OS, the computer’s 

speed will decrease significantly, and a computer restart may 

be required.

• Operation may fail in some computer hardware and software 

configurations.

n Computer (recommended system)

• Windows® XP Service Pack3, Windows® Vista, Windows 7 

or Windows 8

• Mac OS X 10.6.4 or later.

• USB 2.0: USB High speed/USB Audio Class Ver.2.0

n Playback

Install the desired player software on your computer 

beforehand.

Use the rear panel USB port to connect this unit to a 

personal computer. For the connection procedure, refer to 

the “Connecting a PC or Mac” (vpage 11) section.

DAC” (vpage 13).

Start playback on the computer’s 

player software. 

The input digital audio signal is 

displayed as shown.

“USB: zzzzk”. or  

“USB:DSD zzzM”

(zzzz indicates the sampling 

frequency. )

• If the sampling frequency cannot be detected, “Signal 

Unlock” will be displayed. 

• When “USB: XXXXX” is displayed on this unit, wait for 

approximately 10 seconds, and then start and operate 

the music playback software on the computer. This 

unit functions as a D/A converter.

n Files that can be played back

• See “D/A converter” (vpage 31).

• Perform operations such as playback and pause on the 

computer. At this time, you cannot perform operations with 

buttons on this unit or the remote control.

• You can also control the volume and equalizer on the 

computer. Enjoy playing music at the desired volume.

• When this unit is functioning as a D/A converter, sound is not 

output from the computer’s speakers.

• If the computer is disconnected from this unit while the 

computer music playback software is running, the playback 

software may freeze. Always exit the playback software 

before disconnecting the computer.

• When an abnormality occurs on the computer, disconnect 

the USB cable and restart the computer.

• The sampling frequency of the music playback software and 

sampling frequency displayed on this unit may differ.

• Use a cable that is 10 ft/3 m or less to connect to the computer.

If the computer you use is “Mac OS“, please check if the 

“USB High Speed Audio“ format is set below “192000.0 Hz“ 

using the “Audio MIDI Setup“.

1.SA-14S1U_ENG_Prop65_30A_1218.indd   22

2014/12/18   17:07:19