ONKYO CR-505DAB ユーザーズマニュアル

ページ / 40
 
7
 
Before Using the CR-505DAB
 
1
 
Open the battery compartment, as shown.
 
2
 
Insert the two supplied batteries (AAA/
R03) in accordance with the polarity dia-
gram inside the battery compartment.
 
3
 
Close the battery compartment.
 
Notes:
 
• The supplied batteries should last for about six months, 
although this will vary with usage.
• If the remote controller doesn’t work reliably, try replac-
ing both batteries.
• Don’t mix new and old batteries, or different types of bat-
teries.
• If you intend not to use the remote controller for a long 
time, remove the batteries to prevent possible leakage and 
corrosion.
• Drained batteries should be removed as soon as possible 
to prevent possible leakage and corrosion.
To use the remote controller, point it at the CR-505DAB’s 
remote control sensor, as shown below.
 
Notes:
 
• The remote controller may not work reliably if the CR-
505DAB is subjected to bright light, such as direct sunlight 
or inverter type fluorescent lights. Keep this in mind when 
installing the CR-505DAB.
• If another remote controller of the same type is used in 
the same room, or the CR-505DAB is installed close to 
equipment that uses infrared rays, the remote controller 
may not work reliably.
• Don’t put anything, such as a book, on the remote con-
troller, because the buttons may be pressed inadvertently, 
thereby draining the batteries.
• The remote controller may not work reliably if the CR-
505DAB is installed in a rack behind colored glass doors. 
Keep this in mind when installing the CR-505DAB.
• The remote controller will not work if there’s an obstacle 
between it and the CR-505DAB’s remote control sensor.
 
Installing the Remote Controller 
Batteries
 
Using the Remote Controller
CR-505DAB
5 m
R
C-5
81
S
Remote control 
sensor