ONKYO CR-545 CR-545UKD ユーザーズマニュアル

44 

The CD receiver has four programmable timers for 
automated playback, and a sleep timer for turning the 
CD receiver off after a specified period. 
The timers can be used to start all the playback at a 
specified time. You could, for example, use a timer to 
turn on the CD receiver every morning, just like a 
radio alarm clock. 
 

The various settings for the four programmable 
timers are explained here. For details on the sleep 
timer, see page 46. 

Repeat Timers 
Each timer can be programmed to work just once 
(Once), every week (Every), every day (Everyday), 
or on a range of days (Days Set). 
 
Once 

The timer will work just once. 

The timer will work every week on the specified 
day and time. 
• Everyday 

The timer will work every day. 

• Days 

Set 

The timer will work on the specified range of 
days. With this setting, you could set up a 
morning alarm from Monday to Friday. 

Timer Example 
To wake up to your favorite radio station (preset #1) 
every morning, you could program a timer as 
follows: 
FM

ݬ

#1

ݬ

Every

ݬ

Everyday

ݬ

On 7:00

ݬ

Off 7:30 

ݬ

Timer Vol. 15 

If you want a radio alarm only on weekdays, select 
“Days Set” instead of “Every Day” and specify 
“MON–FRI”. 

Timer Priority 
If two or more timers are set to the same On time, the 
lowest numbered timer has priority. For example: 

Timer 1: 07:00 – 13:00 (This timer has priority.) 
Timer 2: 07:00 – 12:30 

If two or more timers overlap, the timer with the 
earliest start time has priority. For example: 

Timer 1: 9:00 – 10:00 
Timer 2: 8:00 – 10:00 (This timer has priority.) 

If the On and Off times of two timers are the same, 
the timer with the earliest start time has priority and 
the other timer will fail. For example: 

Timer 1: 0:00 – 1:00 (This timer has priority.) 
Timer 2: 1:00 – 2:00 

Time Indicators 
When a timer has been set, the TIMER (

) 

indicator and the number of the timer appear on the 
display.  
 
Notes: 
• 

The timers work only if the CD receiver is on 
Standby. If it’s on when a timer is supposed to 
start playback, nothing will happen. 

• 

While timed playback is in progress, the timer’s 
Off time cannot be changed. 

 

Notes: 
•    You must set the clock before you can program 

the timers. 

•    Before programming a timer to turn on the radio, 

you must preset the station you want to use. (See 
pages 37 and 38.) 

•    If you don’t operate any buttons for 60 seconds 

while programming a timer, the procedure will be 
cancelled and the previous display will reappear. 

 

If “Clock” appears, you need to set the 
clock (see pages 17, 42, and 43). 

You can select the following sources: 

CD, iPod, USB, FM, AM, or LINE   

CD, iPod, USB, DAB, FM, or LINE   

If you selected other than 
“FM”,“AM”, or “DAB”, skip to step 4.