ONKYO TX-SR702E 操作ガイド

 

9

 

For detailed information, see the pages in parentheses.

 

A

 

American and Australian models don’t have this 
switch.

This is the main power switch. When set to OFF, the 
AV receiver is completely shutdown. When set to 
ON, it’s in Standby mode and the STANDBY indi-
cator lights up.

Don’t turn on the power until you’ve completed, 
and double checked all connections.

 

B

 

This button is used to set the AV receiver to On or 
Standby. For models with a POWER switch, this 
button has no effect unless the POWER switch is set 
to ON.

 

C

 

This indicator lights up when the AV receiver is in 
Standby mode, and it flashes while a signal is being 
received from the remote controller.

 

D

 

This indicator lights up when Zone 2 is selected.

 

E

 

This sensor receives control signals from the remote 
controller.

 

F

 

This button is used to select the input source to be 
recorded.

 

G

 

This button is used to select the input source for 
Zone 2.

 

H

 

This button is used to set the volume for Zone 2.

 

I

 

These buttons are used to select the input source to 
be recorded via the REC OUTs, the input source for 
Zone 2, and to set the volume for Zone 2.

 

J

 

This button is used to select the Stereo listening 
mode.

 

K

 

These buttons are used to select the listening modes.

 

L

 

This button is used to display various information 
about the currently selected input source.

 

M

 

See “Display” on page 10.

 

N

 

This button is used when storing or deleting radio 
presets.

 

O

 

This button is used to select the Auto or Manual tun-
ing mode.

 

P

 

This button is used to adjust the display brightness.

On the European model, this is the RT/PTY/TP but-
ton, and it’s with RDS (Radio Data System). See 
“Using RDS (European models only)” on page 58.

 

Q

 

This button is used to access the onscreen setup 
menus that appear on the connected TV.

 

R

 

When the AM or FM input source is selected, the 
TUNING [

] [

] buttons are used to tune the 

tuner, and the PRESET [

] [

] buttons are used 

to select radio presets (see page 57). When the 
onscreen setup menus are used, they work as arrow 
buttons and are used to select and set items. The 
ENTER button is also used with the onscreen setup 
menus.

 

S

 

This button is used to return to the previously dis-
played onscreen setup menu.

 

T

 

This control is used to adjust the volume of the AV 
receiver to MIN, 1 through 99, or MAX

 

U

 

The American TX-SR602 doesn’t have this button 
and indicator.

This button is used to select the Pure Audio listen-
ing mode. The indicator lights up when that mode 
selected.

 

V

 

This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.

 

W

 

The included speaker setup microphone is con-
nected here for automatic speaker setup.

 

X

 

These buttons are used to adjust the bass and treble.

 

Y

 

These buttons are used to select from the following 
input sources: MULTI CH, DVD, VIDEO 1, 
VIDEO 2, VIDEO 3, VIDEO 4, TAPE, TUNER, 
CD, or PHONO (TX-SR702/702E only).

The [MULTI CH] button selects the DVD analog 
multichannel input.

 

Z

 

This input can be used to connect a camcorder, 
games console, and so on. There are jacks for opti-
cal digital audio, S-Video, composite video, and 
analog audio.

TX-NR702,602_En.book Page 9 Tuesday, September 7, 2004 1:18 PM