First Alert K5309-5V2 ユーザーズマニュアル
– 29 –
3DJLQJ)HDWXUH
0DQXDO3DJLQJ
Your system may be set up so you can manually send a message to up to four
(FA168CPS) or two (FA148CP) pagers.
(FA168CPS) or two (FA148CP) pagers.
• Your installer programs the paging function key and the pager phone numbers.
• Pressing the paging keys sends the message
9 9 9 – 9 9 9 9
to the selected pager.
• This message could mean “call home”, “call your office”, or any other prearranged
meaning.
• See the Paging chart at the back of this manual for details of the paging setup for
your system.
1. Hold
pager key
2 seconds then press pager no. (1-4).
Press and hold the programmed Paging Key for at
least 2 seconds (wait for beep), then press the pager
number* representing the pager intended to receive
the message.
least 2 seconds (wait for beep), then press the pager
number* representing the pager intended to receive
the message.
2. The recipient, on seeing the 999–9999 message, will
understand the prearranged meaning of this signal.
*
If no number is pressed, the message is sent to pager 1
.
Alpha Display:
(-7%61)(
6)%(= 83 %61
Fixed-Word Display: READY
Pager Display
/DWFK.H\3DJLQJ
You can program a schedule that causes a pager report to be sent if the system is not
DISARMED by the scheduled time (see Scheduling section, event “03”). For example,
a working parent might want a message to be sent to a pager if their child did not
arrive home from school and disarm the system by a certain time.
DISARMED by the scheduled time (see Scheduling section, event “03”). For example,
a working parent might want a message to be sent to a pager if their child did not
arrive home from school and disarm the system by a certain time.
If programmed, the message that is sent is:
7 7 7 – 7 7 7 7 .