Siemens CCMX1315-LP ユーザーズマニュアル
Configuration
39
Siemens Building Technologies
Fire Safety & Security Products
01.2009
z
Password (Confirm): Re-enter the password.
z
FTP Port Number: set “21” as default.
z
FTP Mode
PORT mode: This mode is for most FTP applications
PASV mode: This mode is used when the camera's network environment is
behind a firewall.
PORT mode: This mode is for most FTP applications
PASV mode: This mode is used when the camera's network environment is
behind a firewall.
z
FTP Connecting Method
Reconnect: The network camera logs in/out for each file transfer
Continuous Connection: The network camera is always in connection.
Reconnect: The network camera logs in/out for each file transfer
Continuous Connection: The network camera is always in connection.
Connecting method
You can choose to save your image files to either FTP server 1, 2, or automatically
switching servers.
switching servers.
SD Card Back Up if FTP Fail
The network camera automatically stores images in the SD card when images
cannot be recorded in the server due to a network failure, or other trouble. The
stored images can be transferred to the FTP server when the network status or
other troubles are resolved.
cannot be recorded in the server due to a network failure, or other trouble. The
stored images can be transferred to the FTP server when the network status or
other troubles are resolved.
Function ON/OFF: Select ON to activate SD card FTP back up function.
Accumulation Cycle: Set a time interval in seconds for images to be stored. (Time
interval: 1, 2, 5, 10, 15, 30, 60 or 120 seconds)
interval: 1, 2, 5, 10, 15, 30, 60 or 120 seconds)
Overwrite: Overwrite when SD card reaches the maximum capacity and start with
oldest stored images.
oldest stored images.