Sanyo SID-70 ユーザーズマニュアル

COLOR DOME CAMERA

User Guide

COLOR DOME CAMERA

User Guide

 OFF : Not being used

 HLC (High Light Compensation) :   

     If the scene contains extremely bright light areas such as; from car headlight, the 

light can mask out much of the on-screen detail. 

    - LEVEL : Adjust level of the HLC function.
    - LIMIT : Enable to change the operating condition.
    - MASK COLOR/TONE :  Change the color / brightness of the masking area. 

(Black, Red, Blue, Cyan, Magenta)

    - TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.

3.  Select a desired mode using the Function Setup switch. 

   Select  ‘BLC’ to adjust the area to be 

 enhanced then adjust the level.

 HLC :  Enable the user to change the level, 

limit, mask color/tone and area.

• Because there can be a difference in the effectiveness of HLC according to the amount of

light area in the screen, optimize the installation angle for the best HLC performance.

• When dark, the HLC is only activated when a bright light exceeding a specific size. (In

NIGHT ONLY mode.)

• The HLC is not activated in day light or when bright light is not present at night. (In NIGHT

ONLY mode.)

• When HLC function is used, D-ZOOM and DIS functions are not activated.

Notes

This function reduces the background noise in a low luminance environment.
1.  When the SETUP menu screen is displayed, select  ‘SSNR3’ by using the Function Setup 

switch so that the arrow indicates  ‘SSNR3’  .

MAIN SETUP

  1.LENS 

 

DC  

  2.EXPOSURE   

 

 

  3.WHITE BAL 

 

ATW

  4.SSDR  

 

OFF 

  5.BACKLIGHT 

 

OFF

  6.SSNR3 

 

ON  

  7.DAY/NIGHT 

  AUTO  

2. Select a desired mode using the Function Setup switch.

  OFF : Deactivates SSNR3. Noise is not reduced.       

   ON : Activates SSNR3 so that noise is reduced.       

3.  Set the SSNR3 mode to ‘ON’ and press the Function Setup switch. Then you can adjust 

the noise reduction level.

• You cannot set the SSNR3 to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is

‘OFF’.

• When adjusting the noise reduction level in the SSNR3 mode, remember that the higher

the level set, the more the noise level will be reduced, as will the brightness of the image.

Notes