Samsung SMO-210DN ユーザーズマニュアル

English-5-13

1) Move to ‘STATIC...’ by using 

›‚

KEY at NETWORK ACCESS, then press ENTER SWITCH

to set STATIC...

(STATIC : Select in case the network configuration of monitor is fixed IP (Public or Private IP)

2) Move to IP ADDR / GATEWAY / SUBNETMASK by using 

›‚

KEY .

3) Press ENTER SWITCH and type in IP ADDR / GATEWAY / SUBNETMASK respectively.
4) DNS 1 and DNS 2 will be automatically set to DNS as shown above.

Use 

›‚

KEY to change it.

05/01/05     00:00:01

STATIC ACCESS

IP    ADDR

192.168.1.200

GATEWAY

192.168.1.65

SUBNETMASK

255.255.255.0

DNS 1

168.126.63.001

DNS 2

168.126.63.002

You can use the SMO-210DN products through the network using Dynamic IP on cable/xDSL
modem. In this case, it should be connected with DDNS to support the Dynamic IP.
In case of a configuration using DHCP, as the connection to SMO-210DN is made using domain
names (EX : http://wff0000.websamsung.net) that are automatically registered in our DDNS server,
IP address, Subnet Maskand Gateway that are in the network tab of Admin Mode are not necessarily
to be inputted.
The proper domain names of SMO-210DN are automatically registered to DDNS server installed in
our company in case of modem connection.The default IP type is DHCP .

1) Connect as the figure below and turn on the power of the equipment in the

order shown. 

❶

❸

❷