IBM 42Y ユーザーズマニュアル
138
Netfinity 3500-M20 – Type 8657 Models 21Y, 22Y, 31Y, 32Y,
Error symptoms
301-XXX-000
(Failed Keyboard
test)
(Failed Keyboard
test)
1. Keyboard
405-XXX-000
(Failed Ethernet
test on controller
on the System
Board)
(Failed Ethernet
test on controller
on the System
Board)
1. Verify that Ethernet is not
disabled in BIOS.
2. System Board
405-XXX-00N
(Failed Ethernet
test on adapter in
PCI slot N)
(Failed Ethernet
test on adapter in
PCI slot N)
1. Adapter in PCI slot N.
2. System Board
415-XXX-000
(Failed Modem
test)
(Failed Modem
test)
1. Cable
2. Modem
3. System Board
General
FRU/Action
CD is not working
properly.
properly.
1. Clean the CD.
2. Run CD-ROM diagnostics.
3. CD-ROM Drive
CD-ROM drive tray
is not working.
(The server must be
powered-on.)
is not working.
(The server must be
powered-on.)
1. Insert the end of a paper
clip into the manual tray-
release opening.
release opening.
2. Run CD-ROM diagnostics.
3. CD-ROM Drive
CD-ROM drive is
not recognized.
not recognized.
1. Run Configuration/Setup,
enable primary IDE
channel.
channel.
2. Check cables and jumpers.
3. Check for correct device
driver.
4. Run CD-ROM diagnostics.
5. CD-ROM drive
6. System Board
Power switch does
not work and reset
button does work.
not work and reset
button does work.
1. Verify that switch number 5
of switch block is Off.
2. Power Switch Assembly
3. System Board
Front panel is not
plugged in.
plugged in.
1. Make sure front panel is
plugged in.
On/Off Reset panel
is not plugged in.
is not plugged in.
1. Make sure On/Off Reset
panel is plugged in.
Error
Code/Symptom
FRU/Action