Toshiba IK-HR1S ユーザーズマニュアル

11

Automatic white balance adjustment finished correctly. 

Automatic white balance adjustment cannot be performed because the video level is 

too low. 

Adjust the video level by increasing the illumination or opening the lens iris.

Automatic white balance adjustment cannot be performed because the video level is 

too high. 

Adjust the video level by decreasing the illumination or closing the lens iris.

Automatic white balance adjustment cannot be performed because the color 

temperature is too low.   

If the C.TEMP is set to 5600K, set to 3200K. 

If the message appears with the C.TEMP set to 3200K, change the illumination or 

use a color temperature conversion filter. 

Automatic white balance adjustment cannot be performed because the color 

temperature is too high. 

If the C.TEMP is set to 3200K, set to 5600K. 

If the message appears with the C.TEMP set to 5600K, change the illumination or 

use the color temperature conversion filter. 

Automatic white balance adjustment cannot be performed for other reasons. Such as 

no white area is included in an object, etc. 

(2) MANUAL(Manual white balance) 

 Set the MODE to MANUAL on the WHT BAL menu. 

  (Refer to the item “7.3 (3) WHT BAL (White Balance)”.) 

 Shoot a known white object, set the white balance by adjusting the levels of R GAIN and B GAIN on the 

menu, confirming with a monitor or a vector scope. 

  (Refer to the item “7.3 (3) (3.3) Changing gain in MANUAL mode”.)   

㽲

㽳

IK-HR1S_EN.indd   11

IK-HR1S_EN.indd   11

2008/12/01   17:35:26

2008/12/01   17:35:26