Toshiba IK-WR01A ユーザーズマニュアル
12
Installation/Set up
V
iewing
and Operation
Recording
Setting up
Others
■ Installation to Junction Box with Bracket (Flush Mount
Installation)
83.5 mm (3.29inch)
46 mm (1.81inch)
Screws (not supplied)
x4
x4
Screws
x3
x3
Bracket
Mount camera base with three supplied
screws B. (Shorter screw(M4x10))
Tighten and lock the screws firmly.
screws B. (Shorter screw(M4x10))
Tighten and lock the screws firmly.
Align the marks.
Align to this mark.
Mount the top cover (dome cover
assembly) and secure it firmly with
three security screws using the
supplied special hexangular wrench.
assembly) and secure it firmly with
three security screws using the
supplied special hexangular wrench.
Note the direction of the
screw mounts on the bracket.
The convex side should face
the camera base.
screw mounts on the bracket.
The convex side should face
the camera base.
Junction Box
Unit: mm (inches)
INSTALLATION (Cont.)