Netgear VZCM2050-100NAS ユーザーズマニュアル
Getting Started
9
VueZone System
Set Up Your VueZone System
Your network must be connect to the Internet before you install the VueZone base station.
Follow the steps in this section in the order in which they are presented.
Follow the steps in this section in the order in which they are presented.
Connect the Base Station
The base station needs to be connected to a network with an Internet connection.
To connect the base station to your network:
1
Connect the Ethernet cable to the Ethernet port on the base station and a LAN port on
your router.
Figure 5. Connect the base station to your router and plug in the base station.
2
Connect the power adapter to the base station and power outlet.
•
The blue Power LED lights.
•
The blue Internet LED flashes if the base station can connect to the Internet. It might
take up to 2 minutes before this LED starts flashing.
take up to 2 minutes before this LED starts flashing.
Tip:
For help with troubleshooting, visit
answers and links to VueZone support.