VIVOTEK PT8133 ユーザーズマニュアル

ページ / 175
 
 
VIVOTEK
 
User's Manual - 19  
Using 3GPP-compatible Mobile Devices
To view the streaming media through 3GPP-compatible mobile devices, make sure the Network 
Camera can be accessed over the Internet. For more information on how to set up the Network 
Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 9.
To utilize this feature, please check the following settings on your Network Camera:
1. Because most players on 3GPP mobile phones do not support RTSP authentication, make 
sure the authentication mode of RTSP streaming is set to disabled.  
    For more information, please refer to RTSP Streaming on page 55.
2. As the the bandwidth on 3G networks is limited, larger video sizes are not available. Please 
set the video and audio streaming parameters as listed below. 
    For more information, please refer to Audio and Video on page 68.
Video Mode
MPEG-4
Frame size
176 x 144
Maximum frame rate
5 fps
Intra frame period
1S
Video quality (Constant bit rate)
40kbps
Audio type (GSM-AMR)
12.2kbps
3. As most ISPs and players only allow RTSP streaming through port number 554, please set 
the RTSP port to 554. For more information, please refer to RTSP Streaming on page 55.
4. Launch the players on 3GPP-compatible mobile devices (ex. Real Player).
5. Type the following URL commands in the player. 
The address format is 
rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming 
access name for stream1, 2, or 3>
.
    For example:
rtsp://192.168.5.106:554/live.sdp