JVC VN-H217U ユーザーズマニュアル
Section 28.23.29 Video Surveillance Remote Devices and Sensors
© Copyright 2011
, Victor Company of Japan, Limited. All rights reserved. “JVC” is the trademark or registered trademark of Victor Company of Japan.
All non-metric weights and measures are approximate. Features and specifications are subject to change with out notice.
MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.
4 of 11
VN_H217U/VPU_V.1_00
Specifier Note: Regulations specific to this section vary by geographic location and Owner requirements. Coordinate
article below with Local Authority Having Jurisdiction and/or Owner for requirements. Edit or revise article below as
required for a specific project or specifiers practice.
article below with Local Authority Having Jurisdiction and/or Owner for requirements. Edit or revise article below as
required for a specific project or specifiers practice.
C. Regulatory Requirements:
1.
Video Compression:
a.
a.
MPEG-4: Part 10 Advanced Video Coding (High Profile) – ISO/IEC 14496-10
b.
MPEG-4: Part 2 - ISO/IEC 14496-2
c.
MJPEG
2.
Emission / Immunity:
a.
a.
FCC Part 15, Subpart B, Class A Digital Device
3.
Transmission:
a.
a.
Ethernet: IEEE 802.3 / 802.3u / 802.3af
4.
Safety:
a.
a.
UL Listed 60950-1
5.
Ingress Protection:
a.
a.
IEC IP66
6.
Environmental Sustainability:
a.
a.
RoHS Directive Compliant
1.06 DELIVERY, STORAGE AND HANDLING
A. General: Comply with Division 1, Section 01 61 00 Common Product Requirements and the
manufacturers recommended procedures for receiving and protection of the equipment
B. Storage and Protection: Store materials protected from exposure to extreme or harmful
environmental conditions and at temperature and humidity levels recommended by the
manufacturer:
1.
manufacturer:
1.
Deliver individual components in the manufacturers original packaging and labeling
2.
Prevent physical damage, soiling or wetting
3.
Provide secure storage prior to and during installation
1.07 PROJECT/SITE CONDITIONS
A. Environmental Requirements:
1.
Site should be substantially enclosed and secure prior to installation of hardware
2.
Environmental systems should be in place and operational
3.
Deliver materials onsite at least 24 hours prior to installation to allow materials to reach
temperature and humidity equilibrium
temperature and humidity equilibrium
1.08 WARRANTY
A. Provide original equipment manufacturers warranty documentation for acceptance by the Owner
Specifier Note: Coordinate sub-paragraph below with manufacturers warranty policies and procedures if different from
General Conditions, specifically Division 01, Section 01 78 36 - Warranties
General Conditions, specifically Division 01, Section 01 78 36 - Warranties
1. Warranty Period: [specify term] commencing with the Date of Substantial Completion