JVC 137 ユーザーズマニュアル
66
Format /api/param?camera.private_mask.area=data
Example of Response camera.private_mask.area&202 Accepted(camera.status=save)
Interpretation Change the area of privacy masking. Specify bitmap by 510 characters of hexadecimal number. A
bit for privacy masking is 32x32 pixels block, and 1920x1080 is divided to 60x34 blocks. For example, specify f to
mask 8 blocks. The change is saved by the API, camera.status=save. If the change is not saved, the setting is
restored by reboot.
Allowed users admin, operator
17. JVC API for Motion Detect
The APIs below are related to motion detection. These are equivalent to the features on the Motion Detection
page of the WEB setting page. Refer to the instruction manual for details on the Motion Detection page.
Getting Motion Detect On/Off Status
Format /api/param?camera.detection.status
Example of response camera.detection.status=on&200 OK
Interpretation Acquire the on/off status of motion detect.
Allowed users admin, operator, user
Setting Motion Detect to On/Off
Format /api/param?camera.detection.status=data
Example of Response camera.detection.status&202 Accepted(camera.status=save)
Interpretation Change the on/off status of motion detect. The change is saved by the API, camera.status=save.
If the change is not saved, the setting is restored by reboot.
Allowed users admin, operator
Getting Motion Detect Sensitivity
Format /api/param?camera.detection.level
Example of response camera.detection.level=20&200 OK
Interpretation Acquire the motion detect sensitivity. A value between 0 to 100 will be returned. The larger the
value, the higher will be the sensitivity.
Allowed users admin, operator, user
Setting Motion Detect Sensitivity
Format /api/param?camera.detection.level=data
Example of response camera.detection.level&202 Accepted(camera.status=save)