JVC LST0886-001A ユーザーズマニュアル

75

(

TV) is applicable to VN-V series only. (TX) is applicable to VN-X series only.

䡵 Stream Settings

For specifying settings for receiving JPEG stream.

A

For selecting the protocol when the viewer acquires data from the 
camera. When 

AHTTPB is selected, lost packets are recovered via 

resending. Camera may be monitored using multiple viewers when 
AMulticastB is selected.
When playing back via multicast, start multicast sending on the 
[Streaming] page. (

● When the built-in viewer is launched with AMulticastB specified, a 

Windows firewall warning may appear. In this case, select 

AunblockB 

and proceed.

● If AblockB is selected, the Windows firewall will block the multicast 

stream and playback of multicast by the viewer will fail.

B

You can change the HTTP port number.
The default port number setting is 80.
Specify the same value as the parameter that is set on the Protocol page 
of the camera. (

C

For selecting the acquisition frame rate of the viewer.
Selecting a large frame rate will increase the processing load of the 
computer on which the viewer is running.

[Set values : 30 (

TV), 25(TV) , 15 , 10 , 7.5 , 6 , 5 , 3 , 2 , 1 , 1/2 , 1/3 ,

● Set to a rate such that the CPU burden of the computer does not 

exceed 80 %. When the CPU is overloaded, the computer may not 
function properly.

D

You can change the multicast IP address.
The default address is 225.0.1.1.

E

You can change the multicast port number.
The default port number setting is 49152.
This is enabled when 

AStartB is selected for the [JPEG Control] item on 

the[Control] page.
Specify the same value as the parameter that is set on the [Streaming] 
page of the camera. (

䡵 Other

A

For specifying the name of the folder in which the captured files are 
stored. (Default name when viewer is installed: 

Amodel nameB

(E.g., 

AVN-V225B folder is made for AVN-V225VPUB)