ZyXEL Communications 3.1 ユーザーズマニュアル

Chapter 11 DDNS

ZyWALL (ZLD) CLI Reference Guide

The following table describes the values required for many DDNS commands. Other values are 
discussed with the corresponding commands.

The following table lists the DDNS commands.

Input Values for DDNS Commands

The name of the DDNS profile. You may use 1-31 alphanumeric characters, 
underscores(

_

), or dashes (-), but the first character cannot be a number. This value is 

case-sensitive.

ip ddns Commands

show ddns [profile_name]

Displays information about the specified DDNS profile or 
about all DDNS profiles.

[no] ip ddns profile profile_name 

Creates the specified DDNS profile if necessary and enters 
sub-command mode. The 

no

 command deletes it.

[no] service-type {dyndns | dyndns_static | 

dyndns_custom | dynu-basic | dynu-premium | 

no-ip | peanut-hull | 3322-dyn | 3322-static}

Sets the service type in the specified DDNS profile. The 

no

 

command clears it.

[no] username username password password

Sets the username and password in the specified DDNS 
profile. The 

no

 command clears these fields.

: You can use up to 31 alphanumeric characters and 

the underscore (_).

: You can use up to 64 alphanumeric characters and 

the underscore (_).

[no] host hostname

Sets the domain name in the specified DDNS profile. The 

no

 

command clears the domain name.

: You may up to 254 alphanumeric characters, 

dashes (-), or periods (.), but the first character must be 
alphanumeric.

[no] ip-select {iface | auto | custom}

Sets the IP address update policy in the specified DDNS 
profile. The 

no

 command clears the policy.

[no] ip-select-backup {iface | auto | custom}

Sets the alternate IP address update policy in the specified 
DDNS profile. The 

no

 command clears the policy.

[no] custom ip

Sets the static IP address in the specified DDNS profile. The 

no

 command clears it.

[no] backup-custom ip

Sets the static IP address for the backup interface in the 
specified DDNS profile. The 

no

 command clears it.

[no] mx {ip | domain_name}

Enables the mail exchanger and sets the fully-qualified 
domain name of the mail server to which mail from this 
domain name is forwarded. The 

no

 command disables the 

mail exchanger.

: You may up to 254 alphanumeric characters, 

dashes (-), or periods (.), but the first character must be 
alphanumeric.

[no] wan-iface interface_name

Sets the WAN interface in the specified DDNS profile. The 

no

 

command clears it.