ZyXEL Communications 3.1 ユーザーズマニュアル
Chapter 1 Command Line Interface
ZyWALL (ZLD) CLI Reference Guide
20
1.2.1 Console Port
The default settings for the console port are as follows.
When you turn on your ZyWALL, it performs several internal tests as well as line initialization. You
can view the initialization information using the console port.
can view the initialization information using the console port.
• Garbled text displays if your terminal emulation program’s speed is set lower than the ZyWALL’s.
• No text displays if the speed is set higher than the ZyWALL’s.
• If changing your terminal emulation program’s speed does not get anything to display, restart the
• No text displays if the speed is set higher than the ZyWALL’s.
• If changing your terminal emulation program’s speed does not get anything to display, restart the
ZyWALL.
• If restarting the ZyWALL does not get anything to display, contact your local customer support.
Figure 1
Console Port Power-on Display
After the initialization, the login screen displays.
Figure 2
Login Screen
Enter the user name and password at the prompts.
Note: The default login username is admin and password is 1234. The username and
password are case-sensitive.
1.2.2 Web Configurator Console
Note: Before you can access the CLI through the web configurator, make sure your
computer supports the Java Runtime Environment. You will be prompted to
download and install the Java plug-in if it is not already installed.
Table 1
Managing the ZyWALL: Console Port
SETTING
VALUE
Speed
115200 bps
Data Bits
8
Parity
None
Stop Bit
1
Flow Control
Off
FLASH: AMD 16M
BootModule Version: V1.14 | 07/09/2010 11:00:00
DRAM: Size = 256 Mbytes
Kernel Version: V2.6.25.4 | 2011-10-28 00:25:30
ZLD Version: V3.00(BDR.0)b9 | 2011-10-28 14:41:45
Press any key to enter debug mode within 1 seconds.
.....................
Welcome to ZyWALL USG 20W
Username: