ZyXEL Communications 3.1 ユーザーズマニュアル

ZyWALL (ZLD) CLI Reference Guide

Use ISP accounts to manage Internet Service Provider (ISP) account information for PPPoE, PPTP 
and cellular interfaces. 

An ISP account is a profile of settings for Internet access using PPPoE, PPTP, or cellular.

The following table lists the PPPoE and PPTP ISP account commands.

PPPoE and PPTP ISP Account Commands

show account [pppoe profile_name | 

pptp profile_name]

Displays information about the specified account(s).

[no] account {pppoe | pptp} 

Creates a new ISP account with name profile_name if necessary and enters 
sub-command mode. The 

no

 command deletes the specified ISP account.

: use 1-31 alphanumeric characters, underscores(

_

), or 

dashes (-), but the first character cannot be a number. This value is case-
sensitive.

[no] user username

Sets the username for the specified ISP account. The 

no

 command clears 

the username.

: You can use alphanumeric, underscores (_), dashes (-), commas 

(,), and 

/@$

 characters, and it can be up to 64 characters long.

[no] password password

Sets the password for the specified ISP account. The 

no

 command clears 

the password.

: You can use up to 63 printable ASCII characters. Spaces are not 

allowed.

[no] authentication {chap-pap | 

chap | pap | mschap | mschap-v2}

Sets the authentication for the specified ISP account. The 

no

 command sets 

the authentication to chap-pap.

[no] compression {yes | no}

Turns compression on or off for the specified ISP account. The 

no

 command 

turns off compression.

[no] idle <0..360>

Sets the idle timeout for the specified ISP account. The 

no

 command sets 

the idle timeout to zero.

[no] service-name {ip | hostname 

| service_name}

Sets the service name for the specified PPPoE ISP account. The 

no

 

command clears the service name.

: You may up to 63 alphanumeric characters, dashes (-), or 

periods (.), but the first character cannot be a period.

: You can use up to 63 alphanumeric characters, underscores 

(_), dashes (-), and 

@$./

 characters.