ZyXEL Communications 3.1 ユーザーズマニュアル
Chapter 38 System Remote Management
ZyWALL (ZLD) CLI Reference Guide
296
38.10.4.1 Dial-in Management Command Examples
The following commands show you how to set up dial-in management with the following
parameters: active, port speed 57600, initial-string ATDT, and description “I am dial-in
management”.
parameters: active, port speed 57600, initial-string ATDT, and description “I am dial-in
management”.
38.11 Vantage CNM
Vantage CNM (Centralized Network Management) is a browser-based global management solution
that allows an administrator from any location to easily configure, manage, monitor and
troubleshoot ZyXEL devices located worldwide. See the Vantage CNM User's Guide for details.
that allows an administrator from any location to easily configure, manage, monitor and
troubleshoot ZyXEL devices located worldwide. See the Vantage CNM User's Guide for details.
If you allow your ZyWALL to be managed by the Vantage CNM server, then you should not do any
configurations directly to the ZyWALL (using either the web configurator or commands) without
notifying the Vantage CNM administrator.
configurations directly to the ZyWALL (using either the web configurator or commands) without
notifying the Vantage CNM administrator.
38.11.1 Vantage CNM Commands
The following table describes the commands available for dial-in management.
You must use the
configure terminal
command to enter the configuration mode before you can use these
commands.
Router# configure terminal
Router(config)# dial-in
Router(config-dial-in)# activate
Router(config-dial-in)# port-speed 57600
Router(config-dial-in)# initial-string ATDT
Router(config-dial-in)# description I am dial-in management
Router(config-dial-in)# exit
Table 179
Command Summary: Vantage CNM
COMMAND
DESCRIPTION
[no] cnm-agent manager url
Sets up the URL of the Vantage server that the ZyWALL registers with. Include the full
HTTPS or HTTP URL. For example, https://1.2.3.4/vantage/TR069.
HTTPS or HTTP URL. For example, https://1.2.3.4/vantage/TR069.
[no] cnm-agent activate
Turns management through Vantage CNM on or off.
cnm-agent keepalive interval
<10..90>
Sets the keepalive interval.
[no] cnm-agent periodic-inform
activate
Turns the periodic inform on or off.
cnm-agent periodic-inform
interval <10..86400>
Sets the periodic inform interval.
cnm-agent trigger-inform
[interval]
initiates a TR069 connection to the server. You can also specify the interval for the
inform messages.
inform messages.
[no] cnm-agent auth activate
Enables or disables authentication of the server when using HTTPS.
show cnm-agent configuration
Displays the Vantage CNM configuration.
[no] cnm-agent acs username
<username for ACS connection
request>
Configure the username of the ACS (Auto-Configuration Server) connection request
for the ZyWALL to authenticate the server using HTTP digest authentication.
for the ZyWALL to authenticate the server using HTTP digest authentication.
No
removes the username of the ACS connection request.