ZyXEL Communications 3.1 ユーザーズマニュアル
ZyWALL (ZLD) CLI Reference Guide
41
C
H A P T E R
4
Status
This chapter explains some commands you can use to display information about the ZyWALL’s
current operational state.
current operational state.
Here are examples of the commands that display the CPU and disk utilization.
Table 7
Status Show Commands
COMMAND
DESCRIPTION
show boot status
Displays details about the ZyWALL’s startup state.
show comport status
Displays whether the console and auxiliary ports are on or off.
show cpu status
Displays the CPU utilization.
show disk
Displays the disk utilization.
show extension-slot
Displays the status of the extension card slot and USB ports and the names of devices connected
to them.
to them.
show fan-speed
Displays the current fan speed.
show led status
Displays the status of each LED on the ZyWALL.
show mac
Displays the ZyWALL’s MAC address.
show mem status
Displays what percentage of the ZyWALL’s memory is currently being used.
show ram-size
Displays the size of the ZyWALL’s on-board RAM.
show redundant-
power status
Displays the status of the ZyWALL’s power modules. The ZyWALL has two power modules. It can
continue operating on a single power module if one fails.
continue operating on a single power module if one fails.
show serial-number
Displays the serial number of this ZyWALL.
show socket listen
Displays the ZyWALL’s listening ports
show socket open
Displays the ports that are open on the ZyWALL.
show system uptime
Displays how long the ZyWALL has been running since it last restarted or was turned on.
show version
Displays the ZyWALL’s model, firmware and build information.
Router(config)# show cpu status
CPU utilization: 0 %
CPU utilization for 1 min: 0 %
CPU utilization for 5 min: 0 %
Router(config)# show disk
; <cr> |
Router(config)# show disk
No. Disk Size(MB) Usage
===========================================================================
1 image 67 83%
2 onboard flash 163 15%