Canon VB-H41B ユーザーズマニュアル

(3) [Active Event Operation]

Select the operation to be performed upon an active

event. If [Enable] is selected, (5) [Preset], (6) [Video

Record] and (7) [E-mail Notification] will be executed

according to their settings upon an active event.

(4) [Inactive Event Operation]

Select the operation to be performed upon an inactive

event. If [Enable] is selected, (5) [Preset], (6) [Video

Record] and (7) [E-mail Notification] will be executed

according to their settings upon an inactive event.

(5) [Preset]

If a preset is specified, the camera will automatically

orient to the specified preset position when an

external device input event occurs. To use presets, it

is necessary to set presets with the Preset Setting Tool

under Admin Tools (p. 94). If there is no need for

additional camera operation, select [None].

(6) [Video Record]

Specify the video record action. If [Enable] is

selected, video will be transmitted to the destination

selected in [Video Record Action] (p. 62) when an

external device input event occurs.

(7) [E-mail Notification]

Select the e-mail notification operation to be

performed. If [Enable] is selected, e-mail

notification will be performed when an external

device input event occurs. To use this function, the

[E-mail Notification] sub-menu must also be set from

the [Upload] menu (p. 59).

(8) [External Device Output for Active Event]

Select whether external device output (1 or 2) is active

or inactive upon an active event. Select [Disable] to

disable external device output.

(9) [External Device Output for Inactive Event]

Select whether external device output (1 or 2) is active

or inactive upon an inactive event. Select [Disable] to

disable external device output.

(10)[Audio Playback at Active Event]

Select the audio playback operation to be performed

upon an active event. If [Enable] is selected, the audio

designated in [Sound Clip] will playback when the

external device input becomes active.

(11)[Audio Playback at Inactive Event]

Select the audio playback operation to be performed

upon an inactive event. If [Enable] is selected, the

audio designated in [Sound Clip] will playback when

the external device input becomes inactive.

(12)[Sound Clip]

Select the sound clip to be played. For registration of

sound clips, see p. 65.

(13)[Volume]

Select the volume of sound clips using an integer of 1

to 100. The greater the value, the louder the volume

becomes.

(14)[Day/Night Mode Switching]

Select the Day/Night Mode switching behavior when

an external device input event is triggered.

When [Switch to Day Mode] is selected, switches to

Day Mode when an active event is triggered, and

switches to Night Mode when an inactive event is

triggered.

When [Switch to Night Mode] is selected, switches to

Night Mode when an active event is triggered, and

switches to Day Mode when an inactive event is

triggered.

Select [Disable] to disable Day/Night Mode switching.

Timer

(1) [Timer Event]

Select [Disable] or [Enable] for timer event.

(2) [Start Time]

Set the start time of the timer event in 24-hour format.

(3) [End Time]

Set the end time of the timer event in the 24-hour

format.

(4) [Repeat Interval]

Select [1 sec.] [5 sec.] [10 sec.] [30 sec.] [1 min.] [5

min.] [10 min.] [15 min. ] [20 min.] [30 min.] [1 hour] [3

hours] [6 hours] or [12 hours] for the timer event

repeat intervals. Select [None] if an operation need

not be repeated.

(5) [Video Record]

Specify the video record action. When [Enable] is

selected, video will be transmitted to the destination

selected in [Video Record Action] (p. 62) when a timer

event occurs.

Important

• When [Day/Night] in the Admin Viewer is set to [Auto], Day/

Night Mode switching will not happen when an external

device input event is triggered (p. 139).

• If the [Day/Night Mode Switching] settings switch Day/Night

Mode while the VB-H41/610/710 Viewer is assigned camera

control, control will be released.