Approach Tech LC-7314 ユーザーズマニュアル

 

13

LAN CAMERA 1

LAN CAMERA 2

LAN CAMERA 16

TO LAN CAMERA VIDEO OUT BNC CONNECTOR

 

 
 

If the system software of the IP Camera needs to be upgraded, please take the following steps to 

safely process it. 

 

1.   Format an SD card using the FAT16 format if it is unformatted; there are no limitations to an SD 

card’s capacity. 

2.   Create a directory named LANCAM in the SD card if it does not exist. 

3.   Copy the file of UPDATE.BIN to the LANCAM-directory. 

4.   If the IP Camera is running, please power it off first. 

5.   Insert the SD CARD into the IP Camera. 

6.   Remove the Ethernet cable from the RJ-45 port and then power on the IP Camera. 

7.   In 5 to 10 seconds, a message reading "UPDATE PROCESSING" will show up on the screen on 

a blue background; if not, please check out steps 1 to 6 carefully or else inform your technical 

support while ignoring the following steps. 

8.   DO NOT power off the IP Camera while this update process is running until the message 

"UPDATE OK RESET PLEASE" appears on the screen; it might take 15 to 30 seconds to 

appear.