Approach Tech LC-7314 ユーザーズマニュアル

 

61

5.1.8  PPPoE & DDNS 

1.  Install the XDSL software (obtained from your ISP dealer) in your PC. 

2.  Search your IP Camera's IP address: you can use your Network Viewer's Scan IP program, 

or just connect the IP Camera and the Video monitor. The monitor screen will show the IP 

address on its right side. 

3.  Change the switch on the IP Camera's side panel to position # 4. 

4.  Installing an IP address in your PC or notebook. 

Desktop 

→ Move the mouse focus to the Network neighborhood and click the right key of the 

mouse 

→ Choose the properties → Choose your local connection → Choose the properties 

and select the configuration 

→ Select the TCP / IP → Choose the properties → Type in the 

IP address in a four-part formula, for example “192. 168. 1.101” (the first three parts must be 

identical to the above numbers, only the last part can be changed to your own number, which 

must never exceed 255) 

→ Click the mask and the mask input, namely “255. 255. 255. 0” (a 

fixed formula) 

→ Click “OK” → Click “OK”. 

5. Desktop 

→ Choose IE browser → Type in the IP Camera’s IP address in the URL (check 

step # 2 above) 

→ Enter → IP Camera images will appear. 

 

 

1. 

Enter the IP Camera home page 

→ Choose the network → Type in “User Name: admin” 

and “Password: 9999” 

→ Click “OK’. 

2. Choose 

PPPoE 

→ PPPoE mode: Select “ON” → Type in “Account” → Type in “Password” 

→ Submit → Unplug the power connection. 

3. 

Plug in the IP Camera and it will receive an IP address from the ISP dealer (this IP address 

is dynamic --- every time you unplug and plug in again you’ll get a new IP address).