Cisco Systems 2900 ユーザーズマニュアル
2-11
Cisco Video Surveillance IP PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome
OL-24281-01
Chapter 2 Operation
Network Tab
SNMP
SNMP is an application layer protocol used to manage TCP/IP-based networks from a single workstation
or several workstations. The camera supports SNMP versions 2c and 3 and can be configured to send
data using a trap.
or several workstations. The camera supports SNMP versions 2c and 3 and can be configured to send
data using a trap.
See the following sections for more information:
•
•
•
•
•
•
•
•
Changing the Hostname
Step 1
Place your mouse pointer over the Network tab.
Step 2
Select General from the drop-down menu.
Step 3
Click in the Hostname box and highlight the text.
Step 4
Type a user-friendly name into the Hostname box (1 to 21 characters) using any combination of
alphanumeric characters.
alphanumeric characters.
A user-friendly name makes it easier to recognize the device on the network.
Step 5
Click the Save button to save the settings, or click the Reset button to clear all of the information you
entered without saving it.
entered without saving it.
Turning On DHCP
The default Dynamic Host Configuration Protocol (DHCP) setting for the camera is DHCP On. If the
DHCP option is set to Off, complete the following steps to reset it to On.
DHCP option is set to Off, complete the following steps to reset it to On.
Step 1
Place your mouse pointer over the Network tab.
Step 2
Select General from the drop-down menu.
Step 3
Select the On option for DHCP.