RCA 811-727191W030 ユーザーズマニュアル
9
EN
Watching a DVD on your TV
1. Connect your TV to the unit using an Audio/
Video cable.
2. Turn on unit. Slide the DVD / AV IN switch to
DVD.
3. Turn on the TV and follow the instructions
included with it to play the DVD.
Connecting unit to a TV
If your TV has Audio/Video inputs, you can
connect the unit to your TV using Audio/Video
cable.
connect the unit to your TV using Audio/Video
cable.
Connections
Listening to a stereo receiver or
amplifier on unit
amplifier on unit
The unit can play two channels Dolby Digital.
Listening external audio equipment
1. Connect the unit to the left/right Audio In
jacks on the other equipment using an Audio/
Video cable.
Video cable.
2. Turn on unit. Slide the DVD / AV IN switch to
DVD.
3. Turn on your audio equipment and follow
the instructions provided with it to select the
AUDIO IN function.
AUDIO IN function.
Note:
• Make sure to use the correct
• Make sure to use the correct
Audio cable. Connecting the
plugs incorrectly may cause a weak
signal.
plugs incorrectly may cause a weak
signal.
• If you have a stereo VCR, make sure you
set it to stereo mode.
• Due to copyright protection, DVD movies
cannot be copied. If you copy a DVD movie
onto a videotape, the resulting copy will
be unclear, with poor sound quality. This is
NOT caused by a defective DVD system.
onto a videotape, the resulting copy will
be unclear, with poor sound quality. This is
NOT caused by a defective DVD system.
Note:
• Make sure to use the correct
• Make sure to use the correct
Audio/Video cable. Connecting
the plugs incorrectly may cause a weak
signal.
the plugs incorrectly may cause a weak
signal.
• If your TV does not have Audio/Video
inputs, you will need to purchase an RF
modulator (sold separately) and follow the
instructions included with it to connect the
unit to your TV.
modulator (sold separately) and follow the
instructions included with it to connect the
unit to your TV.