Panasonic BT-LH2170E ユーザーズマニュアル

50

51

This function is for checking when the subject is captured with only the camera of one side.

MENU EXIT

RETURN

RETURN

[3D ASSIST]
 COMPARISON
          SBYS

The L/R 2 screens are shown side-by-side or arranged vertically 

and a 70 % size half-tone marker is shown inside each of the 

images.

When there is only a left-eye or a right-eye image, discomfort 

will be felt in 3D mode and make stereoscopic vision difficult.

Perform a comparison to check what part of the images are 

outside the markers.

Underlined values indicate factory defaults.

SBYS

T&B

[SBYS]    The SDI1 (L) image appears on the left side and the SDI2 (R) image 

appears on the right side.

[T&B]      The SDI1 (L) image appears at the top and the SDI2 (R) image appears 

at the bottom.

This function is for checking the subject’s position at a fixed screen position in order to determine the depth position of the main sub-

ject.

Automatically or manually switch the SDI1 (L) image and SDI2 (R) image and then check the subject’s position.

MENU EXIT

RETURN

RETURN

[3D ASSIST]
 CONVERGENCE
        MANUAL
 MANUAL      L
 SPEED    SLOW

Normal display of one screen

• The place at which the image does not change is the conver-

gence point.

• When the camera adjustment (vertical or rotation direction 

position adjustment) is correct, the image at other than the 

convergence point will shift to the left/right target.

Underlined values indicate factory defaults.

CONVERGENCE MANUAL

AUTO

Selects how the images on SDI1 (L) side and the SDI2 (R) side are switched.

[MANUAL] Manual switching        [AUTO] Automatic switching

L

R

Selects the image to display when [CONVERGENCE] is set to [MANUAL].

[L] SDI1 (L) side image                [R] SDI2 (R) side image

SLOW

FAST

Selects the speed when [CONVERGENCE] is set to [AUTO].

[SLOW]  Every 1 second

[FAST]   Every 4 frames (at 720P: Every 8 frames)