ONKYO DR-UN7 ユーザーズマニュアル

21

Connect the white plugs of the audio cables to the L jacks and connect the red plugs of the audio cables to the R jacks.
Tip: The source names appearing in the display can be customized for the connected component (see page 28).

The following diagram illustrates how to connect an optional Onkyo stereo cassette tape deck. 
Connect the DVD receiver’s TAPE/HDD OUT jacks to the tape deck’s INPUT (REC) jacks, and the DVD receiver’s 
TAPE/HDD IN jacks to the tape deck’s OUTPUT (PLAY) jacks.

• You can control a connected Onkyo stereo cassette tape deck using the supplied remote controller. You also need to 

connect the RCA/phono audio cable.

• To operate the 

 system, the source name in the display should be TAPE. (Since the default source name in the 

display is TAPE, you do not need to change the setting. See page 28 for further information.)

• When the connected Onkyo stereo cassette tape deck plays back, the Input Selector on the DVD receiver is automat-

ically switched to TAPE.

The following diagram illustrates how to connect the Onkyo DS-A1 which is sold separately.
Connect the TAPE/HDD IN jacks on the DVD receiver to the AUDIO OUT jacks on the RI Dock.

• You can control a connected Onkyo RI Dock using the supplied remote controller. You also need to connect the RCA/

phono audio cable.

• When a RI Dock and other 

-compatible devices are connected with the DVD receiver, you must also interconnect 

the 

 terminals between the two external devices.

• You need to change the source name in the display to HDD. (The default source name in the display is TAPE. See 

page 28 for further information.) If the HDD device has a MODE switch, you must set the switch to HDD.

• When the connected Onkyo RI Dock plays back, the input selector on the DVD receiver is automatically switched to HDD.

red

white

white

red

: Signal flow

Use either socket

 cable supplied 

with the Onkyo stereo 
cassette tape deck

RCA/phono audio cable

red

white

white

red

: Signal flow

white

red

RCA/phono audio cable

 cable

Jacks on the RI Dock’s rear 
panel

white

red