ONKYO DR-UN7 ユーザーズマニュアル

65

Before programming a timer for an AM/FM or XM (US model only) broadcast, program the desired broadcast stations 
to the preset channels. (See pages 48-49.)

Notes:
• You cannot use the timer functions unless the clock is set.
• If you do not operate the buttons for 60 seconds during the timer setting, the unit returns to its normal display.
• The following procedures are performed on the unit. When you use the remote controller to perform these procedures, 

press cursor 

/

 instead of turning MULTI JOG and press ENTER instead of MULTI JOG.

Select from Timer 1 to 4, then press MULTI JOG.

If only “Clock” is displayed, the day of the week and time have not been set. Set the 
day of the week and time.

When the desired timer operation is dis-
played, press MULTI JOG. The Timer Rec 
operation is performed on a connected tape 
deck. During recording, the muting function 
is activated.

Note:
When the selector name of TAPE is set to other than TAPE, you can not select TIMER 
recording.

When the desired source is displayed, press 
MULTI JOG.
For the Timer Rec operation, you can select 
from FM, AM, XM (US model only), LINE, or DIGITAL.

Turn MULTI JOG to select the preset 
number.
When the desired preset number is displayed, 
press MULTI JOG.

or