Sharp LC-32PD5X ユーザーズマニュアル

(Example)

Press POWER on the TV.

•  POWER indicator (Green): The TV is on. (After a few 

seconds, an image appears with sound.)

•  After turning the power “ON” by pressing POWER on the 

TV, you can turn the power ON/OFF by pressing POWER 
on the remote control.

 button

 indicator

 button

Press POWER on the remote control.

•  The TV enters standby mode and the image on the screen 

disappears.

•  The POWER indicator on the TV changes from green to 

red.

Press POWER on the TV.

•  The POWER indicator on the TV turns off.
•  When the TV is turned off by POWER on the TV, you 

cannot turn on the power by pressing POWER on the 
remote control.

Off

Power off

The TV is in standby mode.

Red

The TV is on.

Green

•  If you are not going to use this TV for a long period of time, 

be sure to remove the AC cord from the AC outlet.

•  Minor power is consumed when the TV is turned off by 

 on the TV.

You can change channels in several ways.

r/s on the remote control unit

• Press CH

r to increase the channel number.

• Press CH

s to decrease the channel number.

•  CH

r/s on the TV operates the same as CHr/s on 

the remote control unit.

Select the channels directly by pressing buttons 0 to 9.

a
To select a 1-digit channel (e.g. channel 2): 
• Press 0, followed by 2.
To select a 2-digit channel (e.g. channel 12): 
• Press 1, followed by 2.

When viewing Teletext information
View a page directly which is 3-digit page number from 
100 to 899 by pressing buttons 0 to 9.

Channel display
Channel display changes approximately after 3 
seconds as shown below.

12

SAT.1

B/G

PAL

MONO

12

SAT.1

PD5X_en_b.indd   13

PD5X_en_b.indd   13

2006/12/22   14:28:33

2006/12/22   14:28:33