Sharp LC-32PD5X ユーザーズマニュアル

ページ / 60
Press MENU and the MENU screen displays.
1
Press 
c/d to select “Option”.
2
Press 
a/b to select “Colour System”, and 
then press ENTER.
3
Press 
a/b to select a compatible video signal 
system of your equipment, and then press 
ENTER
.
4
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
 
41
Useful adjustment settings
Colour system setting
You can change the colour system to one that is 
compatible with the image on the screen.
NOTE
•  Factory preset value is “AUTO”.
•  If “AUTO” is selected, colour system for each channel is 
automatically set. If an image does not display clearly, 
select another colour system (e.g. PAL, NTSC 4.43).
Input source
INPUT 1
INPUT 2
Selectable item
AUTO, COMPONENT, VIDEO
AUTO, COMPONENT, VIDEO
Input Select
Selecting input source
Can use for selecting the input source.
Press MENU and the MENU screen displays.
1
Press 
c/d to select “Option”.
2
Press 
a/b to select “Input Select”, and then 
press ENTER.
3
Press TV/VIDEO on the remote control unit 
or TV/VIDEO on the TV to select the input 
source.
•  An image from the selected source automatically 
displays.
•  You can also select the input source by pressing 
a/b.
2
Selecting input signal type
For setting the signal type of external equipment.
Press TV/VIDEO on the remote control unit or 
TV/VIDEO
 on the TV.
1
Press 
a/b to select a signal type you want to 
set, and then press ENTER.
4
NOTE
•  If no (colour) image displays, try to change the other 
signal type.
•  Check the operation manual of the external equipment for 
the signal type.
•  When the signal type is set to “AUTO”, the input terminal 
where cable is connected is automatically selected.
•  When the signal type is set to “AUTO” and multiple video 
signal cables are connected, the signal type is selected in 
the following prioritised order:
  INPUT 1/INPUT 2: COMPONENTs VIDEO
PD5X_en_h.indd   41
PD5X_en_h.indd   41
2006/12/22   14:32:44
2006/12/22   14:32:44