Sharp LL-P202V ユーザーズマニュアル

22

E

The LL-P202V monitor supports a digitizer pen. To use 

the digitizer pen, the utility software must be installed and 

configured. (See page 19.)

n

Function button 2

Function button 1

Pen tip

Function button 1:  Pressing and holding this button and 

touching the screen performs the same 

action as a right-click on a mouse. (factory 

default)

Function button 2:  Pressing and holding this button while 

moving the pen on the screen enables the 

eraser function. (factory default)

You can change the functions that are assigned to the function 

buttons using the digitizer pen utility.
Hover operations

The unit will recognize when the tip of the pen is hovering 

within 15 mm of the screen, allowing you to position the 

pointer without touching the screen.
Shortcut launcher

When you press and release function button 1 while in the 

hovering state, a circular shortcut launcher menu will appear.

You can select the desired operation from the menu. The 

shortcut launcher disappears when you select a function or 

press function button 1 again.

You can press [Launch registered app] to register an 

application and its name. Once registered, [Launch registered 

app] is changed to the name of the registered application, 

allowing the application to be launched from the shortcut 

launcher.

TIPS

•  The shortcut launcher is not displayed on the Windows 8.1/8 

Start screen or on the Windows Store screen.

•  When the digitizer pen is connected, digitizer pen actions 

are enabled and touch pen actions are disabled. To use 

touch pen actions, disconnect the digitizer pen.

•  The digitizer pen supports pen pressure functions. The pen 

can be used with software that responds to pen pressure.

•  The digitizer pen may not be recognized, depending on the 

application, if you touch the display with the pen before the 

hover operation is enabled. Verify that the hover operation 

is enabled and then perform operations using the digitizer 

pen.

•  If the digitizer pen does not operate correctly, try placing 

the tip of the pen vertically on the screen.

n

Place the digitizer pen in the pen stand when it is not being 

used.

Pen stand

Digitizer pen

You can wrap the digitizer pen cable around the digitizer pen 

stand.

Bottom cover

Top cover

Pen tip 

storage cap

Close the top cover and bottom cover as shown in the 

following diagram.