Sharp LL-S242A-W ユーザーズマニュアル

26

E

Position

 Menu Position

When the monitor is used in portrait orientation (power/menu 

button on the top), this icon moves the display position of the 

menu screen to the bottom of the screen.

Mode

 Mode

Normal
This mode is suited to normal PC screen display.
Pen Writing
This mode is suited to pen writing position.
Game
This mode is suited to video games.
Multimedia
This mode is suited to video playback.
User
The user can adjust the image quality.

Brightness

 Brightness

This icon adjusts the brightness of the backlight.

Other

 Other

n

RGB Range
This setting configures the range of the RGB input signal.

Use “Auto” for normal operation. If the range cannot be set 

correctly in “Auto”, adjust to match the video. Varying the 

setting may cause floating blacks or reduced gradations to 

appear.
DisplayPort Mode
This setting configures the DisplayPort mode.

Use “DisplayPort Mode1” for normal operation.

If the following symptoms occur in “DisplayPort Mode1”, set 

the mode to “DisplayPort Mode2”.

•  The video is interrupted, flickers, or is not displayed.

Signage
Set to “ON” if using the monitor in a signage application 

(controlled using e-Signage (optional)).

n

Touch Mode
This setting configures the touch action mode (See page 25) 

used when the monitor is turned on.

Reset:  The monitor starts in finger/pen mode.

Save:  The monitor starts in the mode that was last used.
Menu Position
This setting is used to set the position of the menu at startup.

Reset: Sets the display position of the menu at startup to 

“Bottom in Portrait Orientation”.

Save: Sets the position to that when power was last turned 

off.

Pen Position Adjustment
This setting adjusts the pointer position if the pen tip position 

is different than the pointer indicator position.

n

Mark Indicators
Touch mark: This setting configures how to display the touch 

mark (See page 28).

Key Mark: This setting configures how to display the key mark 

(See page 28).

Mark Position: This setting configures the display position 

of the status display mark (touch mark/key mark) on the 

screen.
LED Status
This mark toggles the power LED on/off.
TEMPERATURE ALERT
Selects the notification method for an abnormal temperature.

OSD & LED:   When an abnormal temperature is detected, 

the power LED flashes in red and green 

alternately and the screen displays a 

message: TEMPERATURE.

LED: 

 When an abnormal temperature is detected, 

the power LED flashes in red and green 

alternately.

OFF: 

Do not notify about an abnormal temperature.

This setting configures whether or not to display the 

logo screen during startup.

Language

 Language

This setting changes the menu screen display language.

Reset

 

Reset

This setting resets all settings to their factory default.