Jensen UV8035 ユーザーズマニュアル
UV8035
2
PREPARATION
Getting Started
It’s a good idea to read all of the instructions
before beginning the installation.
before beginning the installation.
Contents
Preparation................................................ 2
Installation Instructions.............................. 3
Wiring ........................................................ 6
Detachable Control Panel ......................... 7
Remote Control ......................................... 8
Operating Instructions ............................. 10
Tuner Operation ...................................... 15
CD/DVD Operation.................................. 16
Memory Card Operation.......................... 19
Dual Zone Operation ............................... 20
System Setup Menu ................................ 21
Care and Maintenance ............................ 23
Specifications .......................................... 24
Installation Instructions.............................. 3
Wiring ........................................................ 6
Detachable Control Panel ......................... 7
Remote Control ......................................... 8
Operating Instructions ............................. 10
Tuner Operation ...................................... 15
CD/DVD Operation.................................. 16
Memory Card Operation.......................... 19
Dual Zone Operation ............................... 20
System Setup Menu ................................ 21
Care and Maintenance ............................ 23
Specifications .......................................... 24
Installation Requirements
This unit is designed for installation in cars,
trucks and vans with an existing radio opening.
In many cases, a special installation kit will be
required to mount the radio to the dashboard.
These kits are available at electronics supply
stores and car stereo specialty shops. Always
check the kit application before purchasing to
make sure the kit works with your vehicle. If you
need a kit but cannot locate one, call our
customer support line at 1-800-323-4815.
(U.S.A. and Canada only.)
trucks and vans with an existing radio opening.
In many cases, a special installation kit will be
required to mount the radio to the dashboard.
These kits are available at electronics supply
stores and car stereo specialty shops. Always
check the kit application before purchasing to
make sure the kit works with your vehicle. If you
need a kit but cannot locate one, call our
customer support line at 1-800-323-4815.
(U.S.A. and Canada only.)
Tools and Supplies
The following tools and supplies are needed to
install the radio.
install the radio.
•
Torx type, flathead and Philips screwdrivers
•
Wire cutters and strippers
•
Tools to remove existing radio (screwdriver,
socket wrench set or other tools)
socket wrench set or other tools)
•
Electrical tape
•
Crimping tool
•
Volt meter/test light
•
Crimp connections
•
18 gauge wire for power connections
•
16-18 gauge speaker wire
Speaker Requirements
Only connect speakers rated with a load
impedance of 4 ohms. Speakers with a load
impedance of less than 4 ohms could damage
the unit.
impedance of 4 ohms. Speakers with a load
impedance of less than 4 ohms could damage
the unit.
Toll-Free Installation Assistance
If you require assistance, contact Technical
Support at 1-800-323-4815 from 8:30 a.m. to
7:00 p.m. EST Monday through Friday and from
9:00 a.m. to 5:00 p.m. EST on Saturday.
(U.S.A. and Canada only.)
Support at 1-800-323-4815 from 8:30 a.m. to
7:00 p.m. EST Monday through Friday and from
9:00 a.m. to 5:00 p.m. EST on Saturday.
(U.S.A. and Canada only.)