JVC KW-AVX730 ユーザーズマニュアル

29

ENGLISH

~

Ÿ

 

•  You can also change the sound mode by 

pressing the short cut icon. ( 

 7)

You can store your adjustments into <User1>, 
<User2>, and <User3>.

Repeat steps ~ and Ÿ, then...

Move to other six sound modes

Select the band (1), frequency (2), 
adjust the volume (3), then adjust the 
quality factor to make the sound natural 
(4).

 

The adjustment is stored.

• When <High Pass Filter> is set to <On>, the 

setting of low band is invalid. Select <Through> to 
activate the low band setting. ( 

 35)

•  To use a rear view camera, the REVERSE GEAR SIGNAL lead connection is required. For connecting a rear view 

camera, see the Installation/Connection Manual.

The rear view screen is displayed when you shift the 
gear to the reverse (R) position.
•  While the pictures through the camera are shown on 

the screen, no message will be displayed.

•  When you perform one of the following operations, 

the rear view screen is cleared.
– Press DISP.
– Shifting the gear to another position other than the 

reverse (R) position.

Frequency

Quality factor*

Band

EN_KW-AVX838[J]001B.indb   29

EN_KW-AVX838[J]001B.indb   29

10.5.6   2:21:21 PM

10.5.6   2:21:21 PM