Jensen VM9314 ユーザーズマニュアル
12
VM9314
Aspect Ratio
Press the DISP button (10) on the remote control or WIDE button (13) on the
monitor to adjust the aspect ratio as follows:
monitor to adjust the aspect ratio as follows:
Parking Brake Inhibit
When the pink "Parking" wire is connected to the vehicle Parking Brake circuit,
the front TFT monitor will display video when the Parking Brake is engaged.
(When the pink wire is grounded via the Parking Brake circuit, video will be
displayed.)
the front TFT monitor will display video when the Parking Brake is engaged.
(When the pink wire is grounded via the Parking Brake circuit, video will be
displayed.)
Monitor Movement Mechanism
If an obstruction occurs in the monitor path, the following protective
measurements can be executed to prevent damage to the mechanism or
monitor:
measurements can be executed to prevent damage to the mechanism or
monitor:
Table 1: Monitor Protective Measures
Obstruction
Self Protection
OPEN Button
Pressed
Power
Reconnected
Monitor loading
out horizontally
out horizontally
Monitor is automati-
cally loaded into unit
cally loaded into unit
Monitor fully
extended horizon-
tally
extended horizon-
tally
Monitor is automati-
cally loaded into unit
cally loaded into unit
FULL
The entire screen is extended
horizontally to the aspect ratio of 16
to 9. The extension ratio is the same
at any point.
The entire screen is extended
horizontally to the aspect ratio of 16
to 9. The extension ratio is the same
at any point.
NORMAL
The conventional display image has
a 4 to 3 ratio of horizontal to vertical,
leaving a blank area on the right and
left sides of the display.
The conventional display image has
a 4 to 3 ratio of horizontal to vertical,
leaving a blank area on the right and
left sides of the display.
STANDBY
Screen becomes black. Touch
screen to resume.
Screen becomes black. Touch
screen to resume.