JVC LVT1340-001A ユーザーズマニュアル

10

ENGLISH

You can listen to the playback sounds with 
cordless headphones—KS-HP2. 

•  The supplied batteries are not rechargeable. 

DO NOT recharge them; otherwise, battery 
leakage or explosion may result.

•  Insert the batteries with the correct polarity 

“+” and “–” to prevent the battery leakage 
or explosion.

The headphones give best results when used 
within about 2 m (6.6 feet) from the transmitter.
These headphones need to receive infrared (IR) 
signals sent from IR transmitters on the monitor. 
Therefore, if you use the headphones where the 
signals cannot be received in a straight line of 
sight, noises may be generated.

1 IR sensors
 

•  DO NOT cover the IR sensors, as 

reception will become poor.

2 ON/OFF button
 

•  The power automatically shuts off in the 

following cases:

 

– The headphones are used for about 4 

hours.

 

– No signal is received for about 4 

minutes.

 

•  You can turn on the power again by 

pressing the button.

3 POWER lamp
4 Volume control

Playback sounds are transmitted through IR 
transmitters to the cordless headphones.
When using the headphones, set the monitor 
menu item “IR” to “ON.” (See page 14.)

DO NOT use the headphones while driving. 
Shutting out all outside sounds while driving 
is dangerous and may result in a traffic 
accident.

Left side

Right side

IR transmitters

Batteries (R03/AAA)
— supplied only for 

initial setup purpose

EN07-10_KV-MRD900[J]f.indd   10

EN07-10_KV-MRD900[J]f.indd   10

05.3.19   11:30:53 AM

05.3.19   11:30:53 AM