JVC GD-463D10U ユーザーズマニュアル

Connect a DVI device to HDMI-1 using DVI-HDMI conversion cable. Connect 

analog sound output of the DVI device to L and R terminals in HDMI-1 (DVI 

ANALOG AUDIO).

z

Set “HDMI-1 Audio Setting” to “Analog” or “Auto” 

g

z

HDMI-2 and HDMI-3 inputs do not support analog sound (HDMI-1 (DVI 

ANALOG AUDIO)).

When “Auto” is selected in Zoom, the aspect ratio will turn to the ratio 

obtained from the information the monitor received.

z

The aspect ratio will turn to the ratio obtained from WSS (Wide Screen 

Identification Signal), video signal, or control signal of the external devices. 

Without receiving the aspect information, it will be the setting in “Zoom”. 

z

With the full HD LCD display and “Full Native”, you can enjoy full native HD 

resolution of 1920 x 1080. It exposes flaws in the video that were hidden 

when viewing on “Full”.

* The illustrations are emphasised to make clear differences between “Full” 

and “Full Native”.

z

Dark bar or noise may appear at the edges of the screen when viewing in 

“Full Native” for some videos. This is resulted from the signal itself, not due 

to monitor malfunction.

z

If the signal doesn’t 

appear, check that the 

vertical frequency on the 

PC is set to “60Hz”.

Resolution

640 x 480 

(VGA)

1024 x 768  

(XGA)

Vertical frequency (Hz)

60.0

60.0

Full

Full Native

GD-463D10U_EN.book  Page 25  Monday, June 8, 2009  4:20 PM