JVC GET0602-001A ユーザーズマニュアル

More about this unit

General

Turning on the power

• By pressing SOURCE on the monitor panel, you

can also turn on the power. If the source is ready,
playback starts.

Tuner (FM only)

Storing stations in memory

• When SSM is over, received stations are preset in no.

1 (lowest frequency) to no. 6 (highest frequency).

Disc

General

• In this manual, words “track” and “file” are

interchangeably used.

• This unit can only play back audio CD (CD-DA) files

if different type of audio files (MP3/WMA/WAV) are
recorded on the same disc.

Inserting a disc

• When a disc is inserted upside down or has no

playable files, “Cannot play this disc Check the disc”
appears on the screen. Eject the disc.

Ejecting a disc

• If “No Disc“ appears after removing a disc, insert a

disc or select another playback source.

• If the ejected disc is not removed within 15 seconds,

the disc is automatically inserted again into the
loading slot to protect it from dust.

Playing Recordable/Rewritable discs

• This unit can recognize a total of 5 000 files and 250

folders (a maximum of 999 files per folder).

• Use only “finalized” discs.
• This unit can play back multi-session discs; however,

unclosed sessions will be skipped while playing.

• This unit can recognize a total of 25 characters for

file/folder names.

• Some discs or files may not be played back due to

their characteristics or recording conditions.

Playing DVD-VR

• For details about DVD-VR format and playlist, refer

to the instructions supplied with the recording
equipment.

File playback

Playing DivX files

• This unit can play back DivX files with the extension

code <.divx>, <.div>, or <.avi> (regardless of the
letter case—upper/lower).

• Audio stream should conform to MP3 or Dolby Digital.
• The file encoded in the interlaced scanning mode

may not be played back correctly.

• The maximum bit rate for video signals (average) is

4 Mbps.

Playing MPEG1/MPEG2 files

• This unit can play back MPEG1/MPEG2 files with the

extension code <.mpg>, <.mpeg>, or <.mod>*.

* <.mod> is an extension code used for the MPEG2 files

recorded by JVC Everio camcorders. The MPEG2 files
with the <.mod> extension code cannot be played
back when stored on a USB mass storage class device.

• The stream format should conform to MPEG system/

program stream.

The file format should be MP@ML (Main Profile at

Main Level)/SP@ML (Simple Profile at Main Level)/
MP@LL (Main Profile at Low Level).

• Audio streams should conform to MPEG1 Audio

Layer-2 or Dolby Digital.

• The maximum bit rate for video signals (average) is

4 Mbps.

EN44-51_KW-AVX726_001A_3.indd 44

12/10/08 11:13:04 AM