Tascam MD-CD1MKIII ユーザーズマニュアル

Before connecting the MD-CD1MKIII to other units, 

please read their operation manuals thoroughly to ensure 

proper connection. Connect the power cord only after all 

connections have been made.

Connect analog stereo amplifiers, mixers and recorders 

to the analog line inputs and outputs. There are input 

terminals for the MD deck recording source and terminals 

for both the CD and MD outputs, as well as a COMMON 

output for the output signals of the CD deck, the MD 

deck, or both. Selection of either deck’s output signals can 

be performed on the SYSTEM sub-menu of the CD menu 

under the “

COMMON?

” option.

You can use this unit in a system configured with 

• 

balanced analog input/output only by attaching a 

separately sold balanced analog input/output board 

(TASCAM LA-MC1).
Connection cables are not supplied with this unit.

• 

Do not bundle the line level sound signal cables with 

• 

the power or speaker cords as noise or diminished 

sound quality could result.

Digital stereo amplifiers, mixers and recorders can be 

connected through the digital input/output terminals 

(optical or coaxial).

The MD-CD1MKIII features a sampling rate converter, 

which enables you to digitally record signals not only at 

a sampling rate of 44.1 kHz (a sampling rate for MD), but 

also at sampling rates of 32 kHz or 48 kHz.

This unit has been designed to operate on the specified 

power voltage only. Do not plug the power cord into 

outlets of any other voltage.