Tascam MD-CD1MKIII ユーザーズマニュアル

When 

UTOC Writing!

 is flashing on the display, data 

on the recorded contents is being written onto the disc. 

During this process, if the power cord is unplugged from 

the power source, or the unit is moved or disturbed, this 

essential data cannot be correctly recorded on the disc.

When “W_Protected!” is displayed
The inserted MD cannot be recorded, or a playback only 

MD was inserted.
Close the write protect tab to enable recording.

To prevent accidental erasure of the recording
After the source has been recorded onto an MD, slide the 

protect tab to open the hole.

This unit conforms to SCMS. If connected digitally, the 

following restrictions apply:

MD recording

Original

First generation Second generation

Copy-protected Not permitted

Not permitted

Only first 

generation

OK

Not permitted

Copy possible

OK

OK

If tracks are numbered, it is convenient when editing or 

cuing the tracks. During recording, track numbers are 

entered automatically, and may also be entered manually 

either during or after recording.

If a CD or MD is digitally recorded, the track numbers are 

automatically updated according to the track number 

updating of the source, and the Auto Track function in  

–**dB

 (

Level

 in 

A_TRK?

) does not work.

For digital recording from any sources other than CD and 

MD, the Auto Track function in 

–**dB

 (

Level

 in  

A_TRK?

) works.

This function automatically enters track numbers during 

recording.
Set this function using the AUTO TRACK button on the 

remote control to select 

OFF

, 

–**dB

, 

DD

 or 

TIME

.

You can also set the auto track function using the 

A_

TRK?

 option in the REC sub-menu of the MD menu. (To 

set 

–**dB

, select 

Level

 from the 

A_TRK?

 option.)

–**dB
If the signal falls below the Auto Track operation level for 

more than 2.5 seconds, a track number is automatically 

entered. To set this operation level, use the 

A_TRK 

LEVEL?

 option on the REC sub-menu of the MD menu. 

The level can be set between –72 dB to –30 dB in 6 dB 

increments.
TIME (Time Track Increment)
When the specified time (Auto Track operation time) has 

expired, track numbers will be updated automatically. Set 

this operation time using the 

A_TRK TIME?

 option 

on the REC sub-menu of the MD menu. The setting 

range is from one minute to 10 minutes (in one minute 

increments).

Even when the power is turned off, the Auto Track, Auto 

• 

Track Level and Auto Track Time settings are retained.
If you change the Auto Track operation time during 

• 

recording, the change will be applied beginning with 

the next track.
When the auto track mode is 

• 

Time

 and the pre-

recording function is activated, the first track will 

become longer by the specified pre-recording time 

than the time set in 

A_TRK TIME?

.

Pressing the RECORD button during recording updates 

the track numbers.

When a track is divided manually, any new tracks must be 

longer than 4 seconds.

Track numbers can be updated during editing operation. 

Refer to “Divide tracks (DIVIDE)” on page 41.
Or you can reduce the number of tracks by combining 

tracks using editing functions. Refer to "Combine tracks 

(COMBINE)" on page 42.