Eltax DR-110 ユーザーズマニュアル

 

19

This option sets the audio output format sent using the 
unit’s optical digital audio output. 

 

 

LPCM 48K  

In the Linear PCM setting, “48K” means “the digital 
audio output maximum sampling rate is 48kHz”; 
therefore, when the title’s encoding sampling rate* is 
96kHz, the output will be forced converted to 48kHz. 

 

LPCM 96K  

If “96K” is selected, then the maximum 
output-sampling rate is 96kHz and no conversion will 
take place. 
 
 
 
 
 
 
 
 
 

NOTES: 

 

Sampling rate:  

When a sound wave is converted to a digital signal, the sound is 

sampled and converted to data at a specific frequency rate. For 

example, a signal with a 96 kHz sampling rate indicates that in one 

second, the analog signal was sampled 96000 times to produce 

the digital signal. 

 

In LPCM set-up menu, there will be a case that even when “LPCM 

96K” is selected, output signal is converted to 48kHz if the disc has 

the copy guard management system in it.

 

Dolby Digital

®

 

Dolby Digital Bit stream  

(1~5.1 ch) or 48kHz/16bits 

2ch Linear PCM 

DTS

®

 

Bit stream (1~5.1 ch) or OFF 

Linear PCM 

(48/96kHz, 24bits) 

Linear PCM 

(48kHz/16 bits up to 96kHz/24bits)

MPEG 1 

Linear PCM (44.1kHz sampling) 

Linear PCM 

Linear PCM (44.1kHz/16bit) 

There are four available selections: ANGLE MARK, OSD 
LANG, CAPTIONS, and SCR SAVER. 

 

During playback of a title with multiple angle sections, 
the message " 

" will appear on the upper corner of 

the screen. 

 

When ANGLE MARK is set to "ON", the angle mark 

OSD will stay on the screen until the end of the 
playback title or chapter. 

 

When ANGLE MARK is set to "OFF", the angle mark 

OSD will stay on the screen for 3 sec and then 
disappear. 

 
 
 
 
 
 
 
 
 
 

 

You can select the language for the setup menu or the 
operation message display. There are five available 
OSD languages: ENGLISH, FRENCH, GERMAN, 
DUTCH and DANISH for display.