IBM T120 ユーザーズマニュアル

Driver Installation for Windows VISTA

This section must be

completed before continuing

with the Windows VISTA

Auto

Setup

on page 13

On LCD monitors, unlike

CRTs, a faster refresh rate

does not improve display

quality .IBM recommends using

1600 x1200 at a fresh rate of

60Hz

To install the device driver in use the Plug and Play feature in Microsoft

Windows

Vista files should be loaded from the IBM Monitor CD.

1. Turn off the computer and all attached devices.

2. Ensure that the monitor is connected correctly.

3. Turn on the monitor and then the system unit. Allow the system to boot

into Windows Vista

4. Open

the

DISPLAY PROPERTIES

window by clicking

START

CONTROL

PANEL

and then double-clicking the

Personalization

icon.

5. Click

the

Display Settting

button.

6. Click

the

Advanced Setting

button

7. Click

the Monitor tab.

Click the Properties button, Click the Continue button

9. Click

the

DRIVER

tab.

10. Open the “Update Driver Software-Generic PnP Monitor” window by

clicking on

Update Driver

and then click the

“Browse my computer for

driver software”

button.

11. Select the “Let me pick from a list of device on my computer”

12. Insert the Setup CD into the CD drive: and click the

HAVE DISK

button.

13. Ensure that the CD drive letter is selected.

14. Click OK.

15. Choose X:\driver\windows vista driver\IBM4945 and click OK. and click

OK. The files will be copied from the CD to your hard disk drive.

16. Close all open windows and remove the CD.

17. Restart the system.

The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.