Zenoah G2500 ユーザーズマニュアル
G2500 / G2500 OPS
GB-4
10. Always hold the chain saw firmly
with both hands when the engine
is running. Use a firm grip with
thumb and fingers encircling the
chain saw handles.
is running. Use a firm grip with
thumb and fingers encircling the
chain saw handles.
11. Keep all parts of your body away
from the saw chain when the en-
gine is running.
gine is running.
12. Before you start the engine,
make sure the saw chain is not
contacting anything.
contacting anything.
13. This product is provided with a
centrifugal clutch. Accordingly,
the saw chain starts to rotate the
moment the choke knob is set to
the “START” position (first step)
to start the engine. At the start,
put the machine body on the flat
ground and pull the starter rope
while holding the machine body
securely so that the saw chain
cannot touch the ground and sur-
rounding obstacles.
the saw chain starts to rotate the
moment the choke knob is set to
the “START” position (first step)
to start the engine. At the start,
put the machine body on the flat
ground and pull the starter rope
while holding the machine body
securely so that the saw chain
cannot touch the ground and sur-
rounding obstacles.
14. Don’t pull the starter rope while
pulling the throttle lever (“Start
while pulling”) in the status where
the chain saw is hung with one
hand.
while pulling”) in the status where
the chain saw is hung with one
hand.
Doing this operation is strictly
prohibited.
15. If the saw chain continues to ro-
tate, stop the engine, and then
readjust the idle adjustment
screw after confirming that there
is no hitch on the throttle lever
motion.
readjust the idle adjustment
screw after confirming that there
is no hitch on the throttle lever
motion.
16. Always carry the chain saw with
the engine stopped, the guide
bar and saw chain to the rear,
and the muffler away from your
body.
bar and saw chain to the rear,
and the muffler away from your
body.
17. Always inspect the chain saw be-
fore each use for worn, Ioose, or
damaged parts. Never operate
a chain saw that is damaged, im-
properly adjusted, or is not com-
pletely and securely assembled.
Be sure that the saw chain stops
moving when the throttle control
trigger is released.
damaged parts. Never operate
a chain saw that is damaged, im-
properly adjusted, or is not com-
pletely and securely assembled.
Be sure that the saw chain stops
moving when the throttle control
trigger is released.
1. For safe operation
WARNING
This chainsaw has been especially designed for
tree maintenance and should therefore only be
used by trained operators when working on trees.
tree maintenance and should therefore only be
used by trained operators when working on trees.
1. Never operate a chain saw when
you are fatigued, ill, or upset, or
under the influence of medica-
tion that may make you drowsy,
or if you are under the influence
of alcohol or drugs.
under the influence of medica-
tion that may make you drowsy,
or if you are under the influence
of alcohol or drugs.
2. Use safety footwear, snug fitting
clothing and eye, hearing and
head protection devices.
Use the vibration-proof glove.
head protection devices.
Use the vibration-proof glove.
3. Keep the saw chain sharp and
the saw, including the AV system,
well maintained. A dull chain will
increase cutting time, and press-
ing a dull chain through wood will
increase the vibrations transmit-
ted to your hands. A saw with
loose components or with dam-
aged or worn AV buffers will also
tend to have higher vibration lev-
els.
well maintained. A dull chain will
increase cutting time, and press-
ing a dull chain through wood will
increase the vibrations transmit-
ted to your hands. A saw with
loose components or with dam-
aged or worn AV buffers will also
tend to have higher vibration lev-
els.
4. All the above mentioned precau-
tions do not guarantee that you
will not sustain whitefinger dis-
ease or carpal tunnel syndrome.
Therefore, continual and regular
users should monitor closely the
condition of their hands and fin-
gers.
If any of the above symptoms ap-
pear, seek medical advice imme-
diately.
will not sustain whitefinger dis-
ease or carpal tunnel syndrome.
Therefore, continual and regular
users should monitor closely the
condition of their hands and fin-
gers.
If any of the above symptoms ap-
pear, seek medical advice imme-
diately.
5. Always use caution when han-
dling fuel. Wipe up all spills and
then move the chain saw at least
3 m from the fueling point before
starting the engine.
then move the chain saw at least
3 m from the fueling point before
starting the engine.
6. Eliminate all sources of sparks or
flame (i.e. smoking, open flames,
or work that can cause sparks)
in the areas where fuel is mixed,
poured, or stored.
or work that can cause sparks)
in the areas where fuel is mixed,
poured, or stored.
7. Do not smoke while handling fuel
or while operating the chain saw.
8. Do not allow other persons to be
near the chain saw when start-
ing or cutting. Keep bystanders
and animals out of the work area.
Children, pets and bystanders
should be a minimum of 10 m
away when you start or operate
the chain saw.
ing or cutting. Keep bystanders
and animals out of the work area.
Children, pets and bystanders
should be a minimum of 10 m
away when you start or operate
the chain saw.
9. Never start cutting until you have
a clear work area, secure foot-
ing, and a planned retreat path
from the falling tree.
ing, and a planned retreat path
from the falling tree.