Husqvarna 1153158-95 ユーザーズマニュアル

38 – English

Following is a list of recommended cutting equipment for the Husqvarna chain saw models 334T and 338XPT. The 
combinations of power head, bar and chain have been tested and found to be in accordance with the kickback and 
vibration requirements of ANSI B175.1–2000.

The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the 
corresponding maximum nose radius of a hard nose.

The following list is the chain saw manufacturers recommendations. There may be other combinations available, which 
will also achieve kickback reduction.

As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list. 
For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of 
sprocket teeth may be considered to have equivalent kickback energy. A hard nose bar having the same length and nose 
radius as a sprocket-nose bar may be considered to have equivalent or less kickback energy than the sprocket-nose bar.

Low kickback saw chain is a chain which has only met the kickback performance requirements of ANSI B 175.1 safety 
requirements for gasoline powered chain saws when tested on the representative sample of chain saws below 3.8 cu. 
in. specified in ANSI 175.1. We recommend that you as a replacement use the listed chains or "Low kickback saw chains" 
which are available at your dealer.

12

3/8

1,3

7 T

Husqvarna H36

45

14

3/8

1,3

7 T

52

12

3/8

1,3

7T

Husqvarna H36

45

14

3/8

1,3

7T

52

16

3/8

1,3

7T

56