Multiquip ONE-WAY PLATE COMPACTOR ユーザーズマニュアル

Figures 1 and 2 shows the location of the components and
general maintenance parts.  The function of each component  is
described below:

1.

Water Tank Cap – Remove this cap to add water to the
water tank.

2.

Fuel Tank Cap – Remove this cap to add fuel.

3.

Lifting Bale – When lifting of the compactor is required
either by forklift, crane etc., tie rope or chain around this
lifting point.

4.

Handle Bar  – When operating the compactor use this
handle bar  to manuever  the compactor.

5.

Gasoline Engine – This plate compactor uses a HONDA
GX160K1QX2 or ROBIN EH172YD4020 engine. Refer to
the HONDA or ROBIN owners manual for  engine
information and related topics.

6.

Belt Cover – Remove this cover to gain acess to the V-
belts. NEVER run the compactor without the V-belt cover. If
the V-belt cover is not installed, the possibility exist that
your hand may get caught between the V-belt and clutch,
thus causing serious injury and bodily harm.

7.

Vibrating Plate – A flat, open plate made of durable cast
iron construction used in the compacting of soil.

8.

Vibration Case – Encloses the eccentric, gears and
counter weights.

9.

Water Tube (Sprinkler) – Supplies water to the soil via a
splash plate.

10. Water Shut-Off Valve – Turn this valve downward to let

water flow from the water tank to the water tube.

11. Water Tank – Holds 13.7 quarts of water, removable no

tools required.

11

6

4

7

8

9

1

2

3

5

10

Mikasa

Mikasa