Cub Cadet cs3310 ユーザーズマニュアル

ページ / 20
8
S
ection
 3 — A
SSembly
 & S
et
-U
p
Set-Up
Gas and Oil Fill-Up
Refer to the separate engine owner’s manual for additional 
engine information.
1. 
Add oil provided before starting unit for the first time out 
of the box. 
2. 
Service the engine with gasoline as instructed in the 
separate engine owner’s manual.
WARNING: 
Use extreme care when handling 
gasoline. Gasoline is extremely flammable and the 
vapors are explosive. Never fuel the machine 
indoors or while the engine is hot or running. 
Extinguish cigarettes, cigars, pipes and other 
sources of ignition.
WARNING: 
Never fill fuel tank indoors with engine 
running or until the engine has been allowed to cool 
for at least two minutes after running.
Tow Bar
To attach the tow bar:
1. 
Remove the spring pin and clevis pin from the end of the 
tow bar receiver. See Figure 3-3.
1
Figure 3-3
2. 
Insert the tow bar into the receiver.
3. 
Reinsert the clevis pin through aligning holes in both the 
tow bar and the receiver. 
4. 
Fasten with the spring pin to secure. See Figure 3-4.
2
3
4
Figure 3-4