Rhino Mounts TW144 ユーザーズマニュアル
ASSEMBLY
TW144 01/11
Assembly Section 3-7
© 2011 Alamo Group Inc.
ASSEMBL
Y
HYDRAULIC OR MANUAL LIFT
Attach the Spring Assembly option (FIGURE Asm-R-0186) to the lug on the cutter deck behind the Center
Gearbox. Retain using 3/4 x 3 capscrew and locknut. Install the Hydraulic Cylinder (FIGURE Asm-R-0187) or
the manual Ratchet Lift Screw 1"x2 3/4(FIGURE Asm-R-0187) between the Axle Center Lug and the Lug
directly behind the Center Gearbox. Tighten all Bolts securely.
Gearbox. Retain using 3/4 x 3 capscrew and locknut. Install the Hydraulic Cylinder (FIGURE Asm-R-0187) or
the manual Ratchet Lift Screw 1"x2 3/4(FIGURE Asm-R-0187) between the Axle Center Lug and the Lug
directly behind the Center Gearbox. Tighten all Bolts securely.
WHEELS - PULL TYPE
Install the Wheels on the Wheel Hubs.
Note: If Laminated Tires are used, place the flat side of the Lug Nut against the Wheel FIGURE Asm-R-0127.
Note direction of travel and curvature of rubber segments in tire and install as shown in FIGURE Asm-R-0127.
Note: If Laminated Tires are used, place the flat side of the Lug Nut against the Wheel FIGURE Asm-R-0127.
Note direction of travel and curvature of rubber segments in tire and install as shown in FIGURE Asm-R-0127.