VTech 6789 クイック設定ガイド

ページ / 2
Quick start guide
for models i6757/6767/6778/6779/6787/6789
NOTE: Use only the power adapters supplied with 
your VTech telephone or equivalent.
NOTE:
For complete feature instructions, please refer to your 
user’s manual.
96-006299-020-100   
issue 0
  STEP 1    Connect power to telephone base and  
 
chargers then connect telephone line  
 
to telephone base
Plug the connector into the power jack at the bottom 
of the telephone base and chargers then plug the 
power adapter into an electrical outlet not controlled 
by a wall switch.
Plug one end of the telephone line cord into the 
telephone line jack at the bottom of the telephone 
base. Then plug the other end of the cord into the 
modular wall telephone outlet.
  STEP 2    Install the battery 
•  Align  the  two  holes  in  the  plug  with  the  socket 
pins matching the color-coded label in the battery 
compartment  of  the  handset,  then  snap  the  plug 
securely into place.
•  Place the battery in the compartment with the wires 
in the upper right corner.
•  Position the battery compartment cover and slide it 
towards the unit until it clicks into place.
•  For optimal performance, we recommend that you 
charge the handset for 16 hours. Note that the new 
battery may have enough charge for some calls.
STEP 3    Make, receive, and end calls
Make a call
•   Press 
/
FLASH or 
/
SPEAKER to ensure there 
is a dial tone, then dial the telephone number. 
 
 
  -OR-
For predialing: 
•  Dial the number (press 
MUTE/REMOVE or 
   
OFF/CLEAR  to  backspace,  or  press  and  hold 
REDIAL/PAUSE to insert a pause).
Press 
/
FLASH or 
/
SPEAKER if you want to 
use the speakerphone function.
Receive a call  
•  Press 
/
FLASH or 
/
SPEAKER or any dialing 
keys (
0-9, #, *) if you want to use the speakerphone 
function.
End a call
•  Press 
OFF/CLEAR,  or  put  the  handset  in  the 
telephone base or charger.
STEP 4    Set the answering system clock
Press 
CLOCK to listen to the current clock setting.
Press 
CLOCK again to change the settings.
Press 
/SKIP or  /REPEAT to change the year, 
hour, minute, or date.
When the correct setting is announced, press 
CLOCK 
to advance to the next setting.
STEP 5    Turn the answering system on and off
The answering system must be turned on to function. 
If the answering system is turned off, the telephone 
base light will be off.
To turn on/off the answering system:
•  Press 
ANS  ON/OFF  to  choose  between  on  and 
off.
STEP 6    Record outgoing announcement
                 (optional)
The  telephone  is  pre-programmed  with  the 
announcement “
Hello, please leave a message after 
the tone
. To replace the default announcement:
•  Press 
ANNC  and  the  system  announces 
“Announcement, press 
PLAY or press RECORD.”
•  Press 
RECORD  to  record,  and  the  system 
announces 
“Record  after  the  tone.  Press 
STOP 
when you are done.”
•  After the tone, speak towards the microphone at the 
front right of the telephone base from about nine 
inches away.
•  Press 
/
PLAY/STOP  when  finished  and  the 
answering system will automatically playback the 
newly recorded announcement. 
  STEP 7    Charge the battery
The battery may have enough charge for a short 
call. For best performance, charge the battery for at 
least 16 hours.
To charge the handset, place it in the telephone 
base or charger.
The 
CHARGE light on the telephone base or 
charger will be on when the handset is properly 
positioned. See 
Troubleshooting in the user’s 
manual if the 
CHARGE light is not on.
For installation and use of the belt clip and the wall 
mount bracket, please consult the user’s manual.
IMPORTANT!
If your product is not working properly:
Refer to the 
Troubleshooting section of your 
user’s manual.
Visit our website at www.vtechphones.com, or in 
Canada, www.vtechcanada.com.
Call our customer service at 1 (800) 595-9511 or              
1 (800) 267 7377 in Canada.